Franco T. Selle : Maintenance Supervisor, Computer Technician

General Information

Present job :
Years experience : None
Education : College Graduate

Resume Details

FRANCO T. SELLE

Present Address: 285 V N. P. Del Rosario Ext., Cebu City

QUALIFICATIONS:

Competent with high skill of technical analysis. Used to work under pressure and unpredicted time due to call of duty. Considering the length of service working from one of the finest TFT-LCD manufacturer in the world, it guarantees the level of skill that I gained and improved more and share for the growth of the company.


EXPERIENCE:

March 2005 ¡V March 2008

PREVENTIVE MAINTENANCE/ TECHNICIAN
L5AB (formerly L8) DRY ETCH DEPARTMENT
AU OPTRONICS CORPORATION ¡V TAIWAN

„X Full knowledge and well oriented in factory¡¦s safety procedure, Standard Operating Procedure (SOP) and emergency response.
„X Experience in a high pressure pumping system using Kashiyama Dry Pump, Roots Booster Pump, and BOC Edwards Turbo Molecular Pump for high vacuum.
„X Experience in troubleshooting of HDP (High-Density Plasma) etching machines, ICP (Inductive Coupled Plasma), PEN (Plasma Etching), and RIE (Reactive Ionized Etching).
„X Install and calibrate the T/M (Transfer Module) robot using the calibration tools in Load Lock (L/L), Transfer Chamber (T/C), and Process Chamber (P/C).
„X Teach and test T/M robot¡¦s accuracy on substrate positioning in the lower electrode using dummy glass in the process chamber.
„X Work with the TEL (Tokyo Electron Limited) vendors dismantling and installing the upper and lower base electrode of ICP, RIE, and PEN during troubleshooting.
„X Experience in changing stage of HDP, focus ring calibration with digital caliper, synchronization of lifter pin and changing Turbo Molecular Pump, APC(Adaptive Pressure Controller) valve, motor and O-ring.
„X Test chamber leaks in vacuum condition after PM using Helium gas detector.
„X Maintains the condition of exhaust piping from the chamber of the machine through a local Water Scrubber and the Guardian known as the Waste Gas Treatment System into the facility piping.
„X Daily checks in the sub-fab piping, CL2 and HCL gas leak test from Guardian, Water Scrubber, Dry pumps and Chiller Unit¡¦s coolant level.
„X Monitor and record data from motors, water box, pump control unit and processed substrate accumulation from the chamber.


October 2001 ¡V October 2004

PREVENTIVE MAINTENANCE/ TECHNICIAN
L4A (formerly L6) WET ETCH DEPARTMENT
AU OPTRONICS CORPORATION ¡V TAIWAN

„X Operates highly automated machines feeding up dummies on the equipment through pc operations.
„X Take control of touch panel and remote controller of the machine for recovering alarm and maintenance.
„X Experience in TFT-LCD etching process using liquid chemical from wet etcher equipment (ITO, AL, SIN and SIO) and strippers.
„X Check the shutter movement, roller alignment and guide to prevent from glass chippings.
„X Monitor frequently the function of stepper motor and particularly on nozzle spray and oscillation for even etching rate.
„X Change filters in different specification from the process chamber into the rinsing units and dryer system.
„X Work with the DNS (Dainippon Screen) and Shibaura vendors modifying and hook up new parts of wet etcher equipment and stripper.
„X Working in a quality time and handling parts safely over the entire maintenance of the equipment to ensure its best performance for a good quality of the product and for its mass production.
„X Working in high standard operating procedures to prevent un-cautious errors during operation.
„X Maintains fully automated equipments in array process of TFT-LCD monitor with large and small scale size panels in a clean room environment.
„X Used to work as a team for a quick-time release of the equipment.
Performs cancellation of the input data when abnormalities occurred in an unpredicted time due to common software errors and hardware problems.

March 2000 ¡V September 2000

Computer Technician
Gillamac Marketing, Inc. ¡V Cebu, Philippines
Computer Sales and Support

„X Assemble number of computers and install windows operating system and other software database like photo/ video editor, antivirus and others.
„X Provide technical service on the customer (internet cafe) when network is failed or other PC problems.
„X Supports product handling during a scheduled shipment to other distant places.
„X Experience in troubleshooting computer hardware/ software errors with few backgrounds in Assembly Language, C++ and Microsoft Access.
„X Worked independently in accordance to the company¡¦s policy.


Trainings:

„X CNC Milling Operation (August 4 - 15, 2008)
TESDA (Technical Education and Skills Development Authority)
TESDA, Taguig, Manila, Philippines

„X Web Page Design (July 28 - 31, 2008)
Microsoft Unlimited Potential and OWWA (Overseas Workers Welfare Administration)
F.B.Harrison, Pasay City, Philippines

„X Microsoft Office (July 14 - 24, 2008)
Microsoft Unlimited Potential and OWWA (Overseas Workers Welfare Administration)
F.B.Harrison, Pasay City, Philippines

„X AUTOCAD Training (July 2 -5, 2008)
AMA-Computer Learning Center - Pasay, Taft Avenue, Manila

Seminars:

„X Basic Electronics (February 1998)
„X Computer Hardware & Software Installation (July 1999)
„X Microsoft Access Programming (August 2000)
„X Basic ¡§GSM¡¨ Principles (September 2000)

EDUCATION:

June 1995 ¡V March 1997
Cebu Technical School - Cebu City, Philippines
„X Bachelor of Science in Electronic Communication Engineering
„X Undergraduate

June 1997 ¡V October 2000
University of Cebu - Cebu City, Philippines
„X Bachelor of Science in Computer Engineering
„X Graduated


PERSONAL DATA:

Age : 29 years old
Nationality : Filipino
Gender : Male
Marital Status : Married
Height : 160 cm
Weight : 60 kg
Religion : Roman Catholic
Permanent Residence : Olivo, Tabuelan, Cebu, 6044 Philippines
Languages : English, Tagalog, Visayan

Passport No. : XX0936148
NBI No. : S629F2LLECO0000